PULSE PolarSpa Cold Plunge (PPS-5000) — Acrylic Plunge Tub with Hot & Cold Chiller
The PULSE PolarSpa is a complete, ready-to-run cold plunge system built around a high-end acrylic freestanding tub and a chiller that both cools and heats. With a range of 37°F to 107°F, it works as an ice-cold plunge in the morning and a warm soak in the evening — the same tub covers both ends of contrast therapy without a second piece of equipment.
Setup is deliberately simple: connect the supplied hoses and fittings, plug the chiller into a standard 110V outlet, and fill. There's no dedicated circuit to install — the system draws roughly 7–10 amps. Set your temperature at the control panel or from your phone using the iOS and Android app, so the water is already at your target when you get home. The included tub cover holds temperature between sessions, and the tub is rated for both indoor and outdoor placement.
Key Features
- Hot and cold in one system — adjustable from 37°F to 107°F for cold plunging or warm soaking
- High-end acrylic freestanding tub, suited to indoor or outdoor installation
- App temperature control via iOS and Android, plus an onboard control panel
- Plug-and-plunge power — standard 110V outlet, approximately 7–10 amps
- Integrated filtration using a standard spa filter for clear water between changes
- Tub cover included to help hold your set temperature
- Hoses and fittings included — connect, plug in, and fill
- Drain connection that accepts a standard hose for straightforward emptying
What's Included
- Acrylic freestanding tub
- Chiller with hot and cold operation
- Hoses and fittings
- Tub cover
- Free delivery
Specifications
| Model | PPS-5000 |
| Product Type | Cold Plunge System (Tub + Chiller) |
| Tub Material | High-end acrylic, freestanding |
| Temperature Range | 37°F – 107°F |
| Chiller Function | Cooling and heating |
| Control | Onboard panel + iOS & Android app |
| Wi-Fi Requirement | 2.4 GHz network for app pairing |
| Power | Standard 110V outlet, approx. 7–10 amps |
| Filtration | Standard spa filter (replace approx. every 3 months) |
| Placement | Indoor or outdoor |
| Shipping Weight | ~310 lbs |
| Shipping Dimensions | 92 × 45 × 36 in |
Is the PolarSpa Cold Plunge right for you?
This is a complete, ready-to-run system — tub, chiller, cover, hoses and fittings all included. What sets it apart is the temperature span: 37°F to 107°F means one tub handles both cold plunging and warm soaking, rather than committing you to cold only.
Buy the PolarSpa if:
- You want cold plunging and warm soaking from a single system
- You want to set the temperature remotely so it's ready when you arrive
- You'd rather have a finished acrylic tub than a portable tub-and-chiller setup
Good to know before you order:
- It runs on a standard 110V outlet — no special electrical work — but you'll want an outlet within reach of where the chiller sits.
- It ships by freight at roughly 310 lbs, so plan your access route and a flat, level spot before delivery day.
- App control needs a 2.4 GHz Wi-Fi network to pair.
- To keep the chiller out of sight, add the PolarSpa Chiller Cover — a solid wood enclosure with a lift-off top for display access.
- For full contrast therapy, pair it with a SaunaLife outdoor sauna to alternate hot and cold.
Questions about placement, power, or delivery access? Call a specialist at (786) 761-9155 — we'll walk through your space before you order.
Frequently asked questions
Does it heat as well as chill?
Yes. The chiller operates hot and cold across a 37°F to 107°F range, so the same tub works as a cold plunge or a warm soak. Switching between the two takes roughly an hour depending on ambient temperature.
What power supply does it need?
A standard 110V outlet. The system draws about 7–10 amps, so there's no dedicated circuit or electrician required for a typical installation.
Can it be installed outdoors?
Yes — the PolarSpa is designed for both indoor and outdoor use. Installed outside, the drain connection accepts a standard garden hose for easy emptying.
How do I control the temperature?
Either at the onboard control panel or through the iOS and Android app, which lets you set the temperature remotely. App pairing requires a 2.4 GHz Wi-Fi network.
How often do I change the filter and the water?
The standard spa filter is typically replaced about every three months, or sooner as needed. Water is generally changed around once a month, though frequency of use and number of users will shift that.
How difficult is setup?
Straightforward — connect the supplied hoses as indicated, plug the chiller into a power outlet, and fill the tub. No plumbing modifications are required for a standard installation.
How is it delivered?
Delivery is free and fully insured. At roughly 310 lbs it ships by freight carrier with tracking and a scheduled delivery appointment, so plan a clear access route and a flat, level placement spot. Our 24/7 US-based support can help you prepare.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.