PULSE PolarSpa Chiller Cover — Solid Wood Enclosure for Your Cold Plunge Chiller
The PULSE PolarSpa Chiller Cover (PPS-2020) is a solid wood enclosure that conceals the chiller unit of your PolarSpa cold plunge, turning exposed equipment into a clean, furniture-grade finish that fits a home gym, spa room, patio, or garden retreat.
The top panel lifts off, so you keep full access to the chiller's digital display for temperature checks and adjustments without moving or dismantling the cover. Four rubber feet screw into the base to protect the surface underneath and keep the enclosure stable, and the reinforced panel seats on the bottom for support. Everything needed to assemble it is in the box except a drill.
Key Features
- Solid wood construction for a finished, furniture-grade look around your equipment
- Removable top panel — lift it off to reach the chiller's digital display any time
- Conceals the chiller unit so your cold plunge setup looks intentional rather than industrial
- Rubber feet included to protect flooring, decking, or patio surfaces
- Reinforced base panel for stable, supported placement
- Straightforward assembly with the included hardware and Allen wrench
What's Included
- 1 × PolarSpa Chiller Cover (solid wood panels)
- 8 × Screws
- 1 × Allen wrench
- 4 × Rubber feet
- Installation instructions
Note: A drill is required for assembly and is not included.
Specifications
| Model | PPS-2020 |
| Product Type | Cold Plunge Chiller Enclosure (Accessory) |
| Material | Solid wood |
| Dimensions | 14″ L × 26″ W × 22″ H |
| Shipping Weight | ~18 lbs |
| Top Panel | Removable, for chiller display access |
| Hardware Included | 8 screws, Allen wrench, 4 rubber feet |
| Tools Required | Drill (not included) |
| Compatibility | PULSE PolarSpa chiller unit |
Downloads
Is the PolarSpa Chiller Cover right for you?
This is a solid wood enclosure for the chiller unit that runs your PolarSpa cold plunge. It's the finishing piece — it hides the equipment while keeping the digital display reachable through a lift-off top panel.
Buy the Chiller Cover if:
- You want your cold plunge area to look finished rather than showing exposed equipment
- Your chiller sits in a visible space — a home gym, spa room, patio, or garden setup
- You still want quick access to the chiller's temperature display
Good to know:
- This is the cover only — it pairs with the PULSE PolarSpa Cold Plunge, which includes the chiller itself.
- The enclosure measures 14″ L × 26″ W × 22″ H — check your chiller and the space around it before ordering.
- Assembly is straightforward, but you'll need your own drill.
Not sure it fits your setup? Call a specialist at (786) 761-9155 — we'll confirm before you order.
Frequently asked questions
What does this cover actually do?
It's a solid wood enclosure that sits over the chiller unit powering your PolarSpa cold plunge, hiding the equipment so the space looks finished. It doesn't change how the chiller runs — it's a cosmetic and protective surround.
How do I reach the chiller controls once it's covered?
The top panel is removable. Lift it off to access the chiller's digital display, then set it back in place — no tools or disassembly needed for everyday use.
What are the dimensions and weight?
The cover measures 14 inches long × 26 inches wide × 22 inches high and ships at about 18 lbs. Measure your chiller and its clearance before ordering to confirm the fit.
What's included, and do I need any tools?
The cover ships with 8 screws, an Allen wrench, 4 rubber feet, and installation instructions. You'll need to supply your own drill — that's the only tool not included.
How does assembly work?
Secure the walls with the provided screws, keeping the reinforced side on the bottom. Flip the cover upside down and screw in the four rubber feet, then turn it upright and fasten the top and bottom wood supports. Add the bottom support where the chiller sits, then set the top cover in place. Full step-by-step instructions are in the downloadable manual above.
Can I use it outdoors?
The PolarSpa system is designed for indoor and outdoor use. As with any solid wood furniture, a sheltered spot and routine care will help the finish last outdoors. If you're planning an exposed installation, call us first and we'll talk through placement.
How is it shipped?
Free and fully insured, typically arriving in 7–10 days with tracking, backed by our 24/7 US-based support.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.